Diagnostic guide · Peugeot
OBD2 fault codes on Peugeot
The codes we see most on 208, 308, 2008, 3008 and 5008 at ASF Motors. Peugeot has very recognisable codes of its own: the FAP additive ones (P1434–P1490), the PureTech wet-belt ones and the BlueHDi AdBlue ones.
01
Which fault codes are typical of Peugeot?
Typical Peugeot codes are P1336 and P0520–P0524 linked to PureTech wet-belt degradation (oil pressure), P1434–P1490 for the FAP additive system, P20EE and P2BAC for BlueHDi AdBlue, P0401 for the EGR and P0087/P0093 for injectors with excess return on the 1.6 HDi.
A P0520 on a 208 or 308 PureTech is not "an oil sensor": it is the sign that the belt is blocking the circuit. We treat it as urgent. FAP additive codes, on the other hand, are solved by refilling and resetting the counter. More under Peugeot garage and PureTech engine.
Frequent Peugeot codes and their usual cause
| Code | Meaning | Usual cause |
|---|---|---|
P1336 | Misfire with oil pressure fault (PureTech) | Degraded timing belt blocking the oil circuit |
P0520–P0524 | Oil pressure | Oil pump strainer blocked by belt debris (PureTech 1.2) |
P1434–P1447 | FAP additive system (Eolys) | Empty additive tank, additive pump, counter not reset |
P1490 | FAP additive level low | Refill additive and reset with diagnostic tool |
P2002/P242F | FAP efficiency / ash | Filter saturated by urban use or depleted additive |
P0401/P0402 | EGR flow | Carbon-fouled EGR on 1.6/2.0 HDi; solenoid |
P0087/P0093 | Low rail pressure / fuel leak | Injectors with excess return (1.6 HDi), pump, filter |
P20EE/P2BAC | SCR efficiency / NOx exceedance | BlueHDi AdBlue system: NOx sensors, crystallised injector, pump |
P20E8 | AdBlue pressure low | AdBlue tank pump or module, crystallisation |
P0299 | Turbo underboost | Hoses, variable geometry, turbo (1.6 HDi from oil starvation) |
P0597 | Thermostat | Electric thermostat (PureTech, THP) |
P0011/P0014 | Camshaft timing | VVT phasers on THP and PureTech, degraded oil |
P0730–P0780 | EAT6/EAT8 gearbox | Aged oil, solenoids; oil change and adaptation |
U1xxx | BSI communication | BSI unit, power, connectors; BSI reset |
This table is indicative and reflects ASF Motors' experience. The real causes of each code are confirmed by diagnosis; do not replace parts on the code alone.
Most common Peugeot services
FAQ
Frequently asked questions
What does P1434 mean on my Peugeot HDi?
FAP additive system fault: empty Eolys tank or pump. Refilled and the counter reset.
Is P0520 on a 208 PureTech serious?
Yes. It indicates abnormal oil pressure, usually from wet-belt debris in the strainer. Check immediately.
Does P20EE mean replacing the NOx sensor?
Not always. Dosing and AdBlue quality are checked first.
Contact
Got a code and not sure what to do? Tell us
Tell us the model and the symptoms. We will tell you what to check first and give you a written quote before touching anything.
- Opening hoursMonday to Friday · 9:00–13:30 and 15:00–19:00 · Saturday 9:00–13:00
- Emailinfo@asfmotors.es
Last updated: